Products - 中文 - Royce Corporation

如何违作

废料零售商

我们的有色金属市场是分散坊多元化的,当中有金属,矿物和循环冝造料如,铜,黄铜,铝,铅,锌,丝锈钢,塑胶,铌,钽和高镝坈金.我们的贸易结构坯以分为四直层:循环冝造物料,生产物料,坊製戝哝和矿物.

从消费坎废料到工业生产坎废料,我们的循环冝造贸易包括所有形弝的废料.我们的生产物料直层专注于商业用的阴枝铜, 高质金属,和高纯度铝.我们的坊製戝哝直层集中于丝坌规格的金属坯,金属薄片,金属圈,金属皮,金属板,金属线竿,二次螝坈锭.和初级铸造坈金.最坎,我们的矿物直层是一个矿物市场如:铌,钽,白钨矿,黑钨矿等.

蝔络我们

废料产哝

Aluminum

Copper

Brass

Lead

Stainless Steel

Zinc

Plastics

Minerals

High Temperature Alloys

Recycling

Primary

Semi-Finished

Mining

Copper #2 / Birch Cliff

A combination of No. 2 copper wire and unalloyed copper scrap having a nominal 96% copper content (minimum 94%) as determined by electrolytic assay. Should be free of the following: Excessively leaded, tinned, soldered copper scrap; brasses and bronzes; excessive oil content, iron and non-metallics; copper tubing with other than copper connections or with sediment; copper wire from burning; insulation; hair wire; brittle burnt wire; and should be reasonably free of ash.

Copper Berry Candy

Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, free of brittle burnt wire. Wire gauge subject to agreement between buyer and seller. Also, shall consist of clean, unalloyed, uncoated copper clippings, punchings, bus bars, commutator segments, and clean copper tubing.

Copper Bare Bright Wire / Barley

Shall consist of No. 1 bare, uncoated, unalloyed copper wire, commonly known as Bare Bright copper wire.

Copper #1, Shredded / Clove

Shall consist of No. 1 bare, uncoated, unalloyed copper wire scrap nodules, chopped or shredded, free of tin, lead, zinc, aluminum, iron, other metallic impurities, insulation, and other foreign contamination. Minimum copper 99%. Gauge smaller than No. 16 B & S wire and hydraulically compacted material subject to agreement between buyer and seller.

Copper Shredded / Cobra

Shall consist of No. 2 unalloyed copper wire scrap nodules, chopped or shredded, minimum 97% copper. Maximum metal impurities not to exceed 0.50% aluminum and 1% each of other metals or insulation. Hydraulically compacted material subject to agreement between buyer and seller.

Copper Shredded / Cocoa

Shall consist of unalloyed copper wire scrap nodules, chopped or shredded, minimum 99% copper. Shall be free of excessive insulation and other non-metallics. Maximum metal impurities as follows: Aluminum .05% Antimony .01% Tin .25% Iron .05% Nickel .05%

Copper Insulated Wire

Shall consist of No. 1 bare, uncoated, unalloyed copper wire (see Barley), not smaller than No. 16 B & S wire gauge (unless smaller wire gauge is mutually agreed upon), with various types of insulation. To be sold on sample or recovery basis, subject to agreement between buyer and seller.

Copper Sudronic Scrap

Copper is a chemical element with the symbol Cu (from Latin: cuprum) and atomic number 29. It is a soft, malleable, and ductile metal with very high thermal and electrical conductivity. A freshly exposed surface of pure copper has a pinkish-orange color. Copper is used as a conductor of heat and electricity,...

Copper Aluminum Radiators / Talk

Shall consist of clean aluminum and copper radiators, and/or aluminum fins on copper tubing, free of brass tubing, iron and other foreign contamination.

Copper Ingots

Copper Coils

Copper Billets

Copper Concentrates

Copper Cathodes

Aluminum UBC (Used Beverage Cans)

Must be magnetically separated material and free of steel, lead, bottle caps, plastic cans and other plastics, glass, wood, dirt, grease, trash, and other foreign substances. Any free lead is basis for rejection. Any and all aluminum items, other than used beverage cans, are not acceptable.

Aluminum Old Castings / Tense

Shall consist of all clean aluminum castings which may contain auto and airplane castings but no ingots, and to be free of iron, brass, dirt and other non-metallic items. Oil and grease not to total more than 2%.

Aluminum Old Sheet Scrap / Taint Tabor

Shall consist of clean old alloy aluminum sheet of two or more alloys, free of foil, venetian blinds, castings, hair wire, screen wire, food or beverage containers, radiator shells, airplane sheet, bottle caps, plastic, dirt, and other non-metallic items. Oil and grease not to total more than 1%.

Aluminum 6xxx Extrusions

Shall consist of one or more alloys (typically 6063 and 6061). Material may contain “butt ends” from the extrusion process but must be free of any foreign contamination. Anodized material is acceptable. Painted material or alloys other than 6063 must be agreed upon by buyer and seller.

Aluminum EC Wire / Talon

Shall consist of new, clean, unalloyed aluminum wire or cable free from hair wire, ACSR, wire screen, iron, insulation and other non-metallic items.

Aluminum Class 1

Material consists of clean, undecorated cans or cups, skeleton, slitter or trim scrap, 3004 or 3104 alloys only. Scrap containing in excess of 1% residual lubricant is unacceptable. Scrap cannot be lacquered, painted, coated or contaminated with gaskets and/or sealant. Other lubricants, such as hydraulic oils) are not acceptable.

Aluminum Class 2

Material consists of clean, compound free can ends (beverage) and tab stock, skeleton and trim scrap, 5182 series alloy only.

Aluminum Class 3

Material consists of spoiled, clean and decorated cans free of residual lubricant and 5182 series lids. Scrap must be 3004 or 3104 alloy only.

Aluminum Radiators / Tally

Shall consist of clean aluminum radiators and/or condensers. Should be free of all other types of radiators. All contaminants including iron, plastic, and foam not to exceed 1% of weight. Any deviation to this specification, including oxidation and aluminum content, to be negotiated between buyer and seller.

Aluminum Clean Lithographic Sheets / Tablet

To consist of 1000 and/or 3000 series alloys, to be free of paper, plastic, excessively inked sheets, and any other contaminants. Minimum size of 3” (8 cm) in any direction.

Aluminum Wheels / Troma

Shall consist of clean, single-piece, unplated aluminum wheels of a single specified alloy, free of all inserts, steel, wheel weights, valve stems, tires, grease and oil and other non-metallic items. Variations to this specification should be agreed upon prior to shipment between the buyer and seller.

Aluminum Zorba

Shall be made up of a combination of the nonferrous metals: aluminum, copper, lead, magnesium, stainless steel, nickel, tin, and zinc, in elemental or alloyed (solid) form. The percentage of each metal within the nonferrous concentrate shall be subject to agreement between buyer and seller.

Aluminum Tassel

Shall consist of old, unalloyed aluminum wire and cable which may contain up to 10% 6000 series wire and cable with not over 1% free oxide or dirt and free from hair wire, wire screen, iron, insulation and other non-metallic items.

Aluminum Twitch

Derived from wet or dry media separation device, the material must be dry and not contain more than 1% maximum free zinc, 1% maximum free magnesium, and 1% maximum of analytical iron. Not to contain more than a total 2% maximum of non-metallics, of which no more than 1% shall be rubber and plastics. To be free of excessively oxidized material, air bag canisters, or any sealed or pressurized items.

Aluminum URD Twang

Insulated aluminum wire, which may or may not contain other wires or metal shielding, with the expected aluminum recovery agreed upon by the buyer and the seller. The material to be free of other wires and cables unless mutually agreed upon.

Aluminum Tarry

Shall consist of clean aluminum pistons to be free from struts, bushings, shafts, iron rings and nonmetallic items. Oil and grease not to exceed 2%.

Aluminum Twang

Aluminum Primary P1020

P1020 (99.7% min Al) Ingots – 0.10% max Si, 0.20% max Fe

Aluminum Primary P0610

P0610 (99.85% min Al) Ingots – 0.05% max Si, 0.10% max Fe

Aluminum Wire Rod

Aluminum Foil

Aluminum RSI Ingot

Aluminum RSI Sows

Brass Yellow / Honey

Shall consist of mixed yellow brass solids, including brass castings, rolled brass, rod brass, tubing and miscellaneous yellow brasses, including plated brass. Must be free of manganese-bronze, aluminumbronze, unsweated radiators or radiator parts, iron, and excessively dirty and corroded materials. Must also be free of any type of munitions including, but not limited to, bullet casings.

Brass Automobile Radiators / Ocean

Shall consist of mixed automobile radiators, to be free of aluminum radiators, and iron-finned radiators. All radiators to be subject to deduction of actual iron. The tonnage specification should cover the gross weight of the radiators, unless otherwise specified.

Brass Red / Ebony

Shall consist of red brass scrap, valves, machinery bearings and other machinery parts, including miscellaneous castings made of copper, tin, zinc, and/or lead. Shall be free of semi-red brass castings (78% to 81% copper); railroad car boxes and other similar high-lead alloys; cocks and faucets; closed water meters; gates; pot pieces; ingots and burned brass; aluminum, silicon, and manganese bronzes; iron and non-metallics. No piece to measure more than 12” over any one part or weigh over 100 lbs. Heavier pieces acceptable upon mutual agreement between buyer and seller.

Brass 70/30 Tin Plated

Brass Turnings

Shall consist of scrap borings and turnings alloyed with copper, tin, bismuth, and zinc. Turnings shall be unmixed and have less than 0.2% alloyed lead or as agreed between buyer and seller.

Brass Nomad

Shall consist of yellow brass turnings, free of aluminum, manganese and composition turnings, not to contain over 3% of free iron, oil or other moisture; to be free of grindings and babbitts. To avoid dispute, to be sold subject to sample or analysis.

Brass Admiralty / Pales

Shall consist of clean condenser tubing which may be plated or unplated, free of excessive corroded material as mutually agreed. Upon mutual agreement between buyer and seller, may be in the form of whole bundles including iron and/or brass heads as well as iron and/or brass baffles.

Brass Night

Shall consist strictly of rod turnings, free of aluminum, manganese, composition, Tobin and Muntz metal turnings; not to contain over 3% free iron, oil or other moisture; to be free of grindings and babbitts; to contain not more than 0.30% tin and not more than 0.15% alloyed iron.

Brass Ingots

Lead Sheet

Lead Range

Indoor or Outdoor. Contact us for details.

Soft Lead

Shall consist of clean soft scrap lead, free of other materials such as drosses, battery plates, lead covered cable, hard lead, collapsible tubes, foil, type metals, aluminum, zinc, iron and brass fittings, dirty chemical lead and radioactive materials.

Wheel Weights

To consist of lead tire balances with or without iron clips. Not to include scrap lead, lugs or plates unless specifically agreed to. To be free of foreign material. Review packaging specifications and regulatory status pertaining to shipping with buyer prior to sale.

Remelted Lead Ingots

Refined Lead Ingots

Stainless Steel Scrap 304

C (0%-0.07%), Mn (0%-2.0%), Si (0%-0.75%), P (0%-0.045%), S (0%-0.03%), Cr (17.5%-19.5%), Ni (8%-10.5%)

Stainless Steel Scrap 316

C (0%-0.08%), Mn (0%-2.0%), Si (0%-0.75%), P (0%-0.045%), S (0%-0.03%), Cr (16%-18%), Mo (2%-3%), Ni (10%-14%)

Stainless Steel Scrap 430

C (0%-0.12%), Mn (0%-1.0%), Si (0%-1.0%), P (0%-0.04%), S (0%-0.03%), Cr (16%-18%), Ni (0%-0.75%)

Stainless Steel Scrap Zurik

Shall be made up of a combination of the nonferrous metals: stainless steel, insulated copper wire, aluminum, copper, lead, magnesium, nickel, tin, and zinc, in elemental or alloyed (solid) form. The percentage of each metal within the nonferrous concentrate shall be subject to agreement between buyer and seller.

Zinc Die Cast

Shall consist of miscellaneous old zinc base die castings, with or without iron and other foreign attachments. Must be free of borings, turnings, dross pieces, chunks, melted pieces and skimmings. All unmeltables, dirt, foreign attachments, and volatile substances (such as rubber, cork, plastic, grease, etc.) are deductible

Zinc Dross

Zinc Ingots

PET Bottle

Any whole Polyethylene Terephthalate (PET, #1) bottle with a screw-neck top that contains the ASTM D7611 “#1, PET or PETE” resin identification code and that is clear, transparent green, or transparent light blue. All bottles should be free of contents or free flowing liquids and rinsed.

PET Flake

See PET Bottle description. Flakes can be presented clean (hot or cold washed) or dirty.

LDPE

HDPE

Coltan

Tin

Niobium

Monel

Incoloy

Inconel

Hastelloy

Aluminum 6xxx Billets

Diameter range from 7 to 12 inches. Typical series 6063/6061/6060/6005. Contact us for details.

The product descriptions above were sourced from the 2018 Scrap Specification Circular: Guidelines for Nonferrous Scrap, Ferrous Scrap, Glass Cullet, Paper Stock, Plastic Scrap, Electronic Scrap written by the Institute of Scrap Recycling Industries, Inc. (ISRI). Source: http://www.scrap2.org/specs/

为什麽选择我们

好处

质針保话

我们长久以来一直供应顶尖的货哝是我们能夠绝蝥多年的秘诀.我们坪会杝供最佳的以坊我们以质針为大剝题.

购买货物

我们的贸易和物浝团队会阝明与产哝有关的问题,当中包括我们团队的规模和我们的于物浝的处睆能力.

准时逝貨

我们明白到覝保挝生愝货如轮转的话,拥有准时稳坥的货物供应是非常針覝的.罗伊斯公坸的物浝团队杝供一套为您而设的逝货日程来迎坈您公坸的需覝.

供应货物

对于我们产哝的疑问,对于坑我們供貨的程庝,坈或任何坑我們採購的有關資訊,我们的贸易团队都会详细坑您解答.

What our Suppliers are Saying

Testimonials

Recycling Facility Owner

Colombia

El negocio de trading internacional está basado en confianza. Un atributo que es fundamental para mí y para mi negocio. Royce Corporation es un ejemplo de profesionalismo llevado de una manera muy transparente y honesta. Una compañía que está dispuesta a trabajar en conjunto por un crecimiento mutuo y sostenible. Ha sido un placer tenerlos como cliente por los últimos 17 años.

Aluminum Semi-finished product Producer

Head of Sales Asia

Working with Royce has been a true pleasure. As a producer, we seek to work with companies that not only add value to our operation but also, that have a long-term commitment. Royce embodies just that; by bringing professionalism and top-quality service along with a great network and reach which enable us to expand our global presence...

Recycling Facility Director

United Kingdom

Hands down the most reliable and creative trading company year in and year out. It has been both a pleasure and a privilege to work alongside Royce Corporation for all these years, we look forward to an even brighter future with a great partner!

Multinational recycling facility Owner

South America

Royce Corporation es la institución líder en nuestro mercado y un claro modelo a seguir. Es un verdadero placer trabajar con un grupo que comprende a plenitud el concepto de “relación a largo plazo” y que a su vez tiene una solidez intachable. En Royce siempre hemos tenido un aliado y sabemos que siempre lo tendremos.

Business Development Manager

United States

Working with Royce has been key for our company’s success and expansion; leveraging on their extensive geographical reach, profound product knowledge, and reliable financial and logistical services we have been able to solidify and expand our product portfolio while increasing our focus on our day to day operations.

Procurement Manager

Guangdong Province, China

Royce sets the bar on all the big three: Timeliness, Quality, and Service.... Outstanding.

Director

South American Aluminum Corporation

Cuando una Empresa es líder en el segmento por participación, calidad y variedad de productos que ofrece y coloca en el mercado, definitivamente debe rodearse de socios comerciales estratégicos que no se limiten a cerrar una relación únicamente en lo comercial sino que cuenten con la visión del trabajo conjunto, la predisposición de enfrentar inconvenientes mancomunadamente y un profesionalismo diferenciado que permita asumir los éxitos como un compromiso de mejora continua en beneficio de las dos partes. Esta es la situación que ventajosamente encontramos con Royce y la fortalecimos de manera sostenida a través del tiempo, experiencias que nos han llevado a considerarlos como una Organización de gran valía, con altísimos valores, de gran desempeño y con un staff de profesionales absolutamente comprometidos y calificados, centrados siempre en el objetivo de satisfacer todas y cada una de las necesidades de sus Clientes. Su trabajo no solamente es recomendable sino digno de emulación. Gracias a todos quienes hacen esta gran Empresa, gracias por ser parte importante de nuestros éxitos, gracias por haber transitado junto a nosotros en aquellos momentos complicados que nunca faltan. Adelante con el engrandecimiento de su sólida firma. Adelante con la consecución de más y mayores triunfos. Estamos seguros que así será. Valoramos y respetamos mucho su gran gestión.