Products

How it works

Diverse range of product offerings

We market a diverse range of metals, minerals and recycled products such as Copper, Brass, Aluminum, Lead, Zinc, Stainless Steel, Plastics, Niobium, Tantalum, and High-Nickel Alloys. Our commercial structure is divided into four verticals: recycling, primary, semi-finished, and mining.

Our Recycling business trades all forms of scrap, from post-consumption to post-industrial. Royce’s Primary vertical focuses on the commercialization of Cathodes, Prime Metals, and High-Purity Aluminum. The Semi-finished business markets different specifications of Billets, Foils, Coils, Sheets, Plates, Wire Rod, Remelted Sow Ingot, and Primary Foundry Alloys. Finally, our Mining vertical is in the market for minerals such as Tantalum, Niobium, Scheelite, Wolframite among others.

Catalog

Aluminum

Copper

Brass

Lead

Stainless Steel

Zinc

Plastics

Minerals

High Temperature Alloys

Recycling

Primary

Semi-Finished

Mining

Aluminum 6xxx Billets

Diameter range from 7 to 12 inches. Typical series 6063/6061/6060/6005. Contact us for details.

Copper #2 / Birch Cliff

A combination of No. 2 copper wire and unalloyed copper scrap having a nominal 96% copper content (minimum 94%) as determined by electrolytic assay. Should be free of the following: Excessively leaded, tinned, soldered copper scrap; brasses and bronzes; excessive oil content, iron and non-metallics; copper tubing with other than copper connections or with sediment; copper wire from burning; insulation; hair wire; brittle burnt wire; and should be reasonably free of ash.

Copper Shredded / Cobra

No. 2 unalloyed copper wire scrap nodules, chopped or shredded, minimum 97% copper. Maximum metal impurities not to exceed 0.50% aluminum and 1% each of other metals or insulation. Hydraulically compacted material subject to agreement between buyer and seller.

Copper #1, Shredded / Clove

No. 1 bare, uncoated, unalloyed copper wire scrap nodules, chopped or shredded, free of tin, lead, zinc, aluminum, iron, other metallic impurities, insulation, and other foreign contamination. Minimum copper 99%. Gauge smaller than No. 16 B & S wire and hydraulically compacted material subject to agreement between buyer and seller.

Copper Berry Candy

Clean, untinned, uncoated, unalloyed copper wire and cable, free of brittle burnt wire. Wire gauge subject to agreement between buyer and seller. Also, shall consist of clean, unalloyed, uncoated copper clippings, punchings, bus bars, commutator segments, and clean copper tubing.

Copper Bare Bright Wire / Barley

No. 1 bare, uncoated, unalloyed copper wire, commonly known as Bare Bright copper wire.

Brass Nomad

Yellow brass turnings, free of aluminum, manganese and composition turnings, not to contain over 3% of free iron, oil or other moisture; to be free of grindings and babbitts. To avoid dispute, to be sold subject to sample or analysis.

Brass Red / Ebony

Red brass scrap, valves, machinery bearings and other machinery parts, including miscellaneous castings made of copper, tin, zinc, and/or lead. Shall be free of semi-red brass castings (78% to 81% copper); railroad car boxes and other similar high-lead alloys; cocks and faucets; closed water meters; gates; pot pieces; ingots and burned brass; aluminum, silicon, and manganese bronzes; iron and non-metallics. No piece to measure more than 12” over any one part or weigh over 100 lbs. Heavier pieces acceptable upon mutual agreement between buyer and seller.

Brass Night

Strictly of rod turnings, free of aluminum, manganese, composition, Tobin and Muntz metal turnings; not to contain over 3% free iron, oil or other moisture; to be free of grindings and babbitts; to contain not more than 0.30% tin and not more than 0.15% alloyed iron.

Lead Strips

Brass is susceptible to stress corrosion cracking, especially from ammonia or substances containing or releasing ammonia. The problem is sometimes known as season cracking after it was first discovered in brass cartridges used for rifle ammunition during the 1920s in the British Indian Army.

Soft Lead

Clean soft scrap lead, free of other materials such as drosses, battery plates, lead covered cable, hard lead, collapsible tubes, foil, type metals, aluminum, zinc, iron and brass fittings, dirty chemical lead and radioactive materials.

Lead Sheet

Stainless Steel Scrap 430

C (0%-0.12%), Mn (0%-1.0%), Si (0%-1.0%), P (0%-0.04%), S (0%-0.03%), Cr (16%-18%), Ni (0%-0.75%)

Stainless Steel Scrap 316

C (0%-0.08%), Mn (0%-2.0%), Si (0%-0.75%), P (0%-0.045%), S (0%-0.03%), Cr (16%-18%), Mo (2%-3%), Ni (10%-14%)

Stainless Steel Scrap 304

C (0%-0.07%), Mn (0%-2.0%), Si (0%-0.75%), P (0%-0.045%), S (0%-0.03%), Cr (17.5%-19.5%), Ni (8%-10.5%)

HDPE

LDPE

PET Bottle

Any whole Polyethylene Terephthalate (PET, #1) bottle with a screw-neck top that contains the ASTM D7611 “#1, PET or PETE” resin identification code and that is clear, transparent green, or transparent light blue. All bottles should be free of contents or free flowing liquids and rinsed.

Niobium

Tin

Coltan

Hastelloy

Inconel

Incoloy

Zinc Dross

Zinc Die Cast

Miscellaneous old zinc base die castings, with or without iron and other foreign attachments. Must be free of borings, turnings, dross pieces, chunks, melted pieces and skimmings. All unmeltables, dirt, foreign attachments, and volatile substances (such as rubber, cork, plastic, grease, etc.) are deductible

Zinc Ingots

Copper Shredded / Cocoa

Unalloyed copper wire scrap nodules, chopped or shredded, minimum 99% copper. Shall be free of excessive insulation and other non-metallics. Maximum metal impurities as follows: Aluminum .05% Antimony .01% Tin .25% Iron .05% Nickel .05%

Copper Insulated Wire

No. 1 bare, uncoated, unalloyed copper wire (see Barley), not smaller than No. 16 B & S wire gauge (unless smaller wire gauge is mutually agreed upon), with various types of insulation. To be sold on sample or recovery basis, subject to agreement between buyer and seller.

Copper Sudronic Scrap

Copper Aluminum Radiators / Talk

Clean aluminum and copper radiators, and/or aluminum fins on copper tubing, free of brass tubing, iron and other foreign contamination.

Copper Ingots

Copper Coils

Copper Billets

Copper Concentrates

Copper Cathodes

Aluminum Foil

Aluminum RSI Ingot

Aluminum URD Twang

Insulated aluminum wire, which may or may not contain other wires or metal shielding, with the expected aluminum recovery agreed upon by the buyer and the seller. The material to be free of other wires and cables unless mutually agreed upon.

Aluminum Primary P0610

P0610 (99.85% min Al) Ingots – 0.05% max Si, 0.10% max Fe

Aluminum Primary P1020

P1020 (99.7% min Al) Ingots – 0.10% max Si, 0.20% max Fe

Aluminum Wire Rod

Aluminum Radiators / Tally

Clean aluminum radiators and/or condensers. Should be free of all other types of radiators. All contaminants including iron, plastic, and foam not to exceed 1% of weight. Any deviation to this specification, including oxidation and aluminum content, to be negotiated between buyer and seller.

Aluminum Clean Lithographic Sheets / Tablet

1000 and/or 3000 series alloys, to be free of paper, plastic, excessively inked sheets, and any other contaminants. Minimum size of 3” (8 cm) in any direction.

Aluminum Wheels / Troma

Clean, single-piece, unplated aluminum wheels of a single specified alloy, free of all inserts, steel, wheel weights, valve stems, tires, grease and oil and other non-metallic items. Variations to this specification should be agreed upon prior to shipment between the buyer and seller.

Aluminum UBC (Used Beverage Cans)

Must be magnetically separated material and free of steel, lead, bottle caps, plastic cans and other plastics, glass, wood, dirt, grease, trash, and other foreign substances. Any free lead is basis for rejection. Any and all aluminum items, other than used beverage cans, are not acceptable.

Aluminum Old Castings / Tense

All clean aluminum castings which may contain auto and airplane castings but no ingots, and to be free of iron, brass, dirt and other non-metallic items. Oil and grease not to total more than 2%.

Aluminum Old Sheet Scrap / Taint Tabor

Clean old alloy aluminum sheet of two or more alloys, free of foil, venetian blinds, castings, hair wire, screen wire, food or beverage containers, radiator shells, airplane sheet, bottle caps, plastic, dirt, and other non-metallic items. Oil and grease not to total more than 1%.

Aluminum 6xxx Extrusions

One or more alloys (typically 6063 and 6061). Material may contain “butt ends” from the extrusion process but must be free of any foreign contamination. Anodized material is acceptable. Painted material or alloys other than 6063 must be agreed upon by buyer and seller.

Aluminum EC Wire / Talon

Shall consist of new, clean, unalloyed aluminum wire or cable free from hair wire, ACSR, wire screen, iron, insulation and other non-metallic items.

Aluminum Class 1

Material consists of clean, undecorated cans or cups, skeleton, slitter or trim scrap, 3004 or 3104 alloys only. Scrap containing in excess of 1% residual lubricant is unacceptable. Scrap cannot be lacquered, painted, coated or contaminated with gaskets and/or sealant. Other lubricants, such as hydraulic oils) are not acceptable.

Aluminum Class 2

Clean, compound free can ends (beverage) and tab stock, skeleton and trim scrap, 5182 series alloy only.

Aluminum Class 3

Spoiled, clean and decorated cans free of residual lubricant and 5182 series lids. Scrap must be 3004 or 3104 alloy only.

Aluminum Zorba

Combination of the nonferrous metals: aluminum, copper, lead, magnesium, stainless steel, nickel, tin, and zinc, in elemental or alloyed (solid) form. The percentage of each metal within the nonferrous concentrate shall be subject to agreement between buyer and seller.

Aluminum Tassel

Old, unalloyed aluminum wire and cable which may contain up to 10% 6000 series wire and cable with not over 1% free oxide or dirt and free from hair wire, wire screen, iron, insulation and other non-metallic items.

Aluminum Twitch

Derived from wet or dry media separation device, the material must be dry and not contain more than 1% maximum free zinc, 1% maximum free magnesium, and 1% maximum of analytical iron. Not to contain more than a total 2% maximum of non-metallics, of which no more than 1% shall be rubber and plastics. To be free of excessively oxidized material, air bag canisters, or any sealed or pressurized items.

Aluminum Twang

Aluminum Tarry

Clean aluminum pistons to be free from struts, bushings, shafts, iron rings and nonmetallic items. Oil and grease not to exceed 2%.

Aluminum RSI Sows

Brass Yellow / Honey

Mixed yellow brass solids, including brass castings, rolled brass, rod brass, tubing and miscellaneous yellow brasses, including plated brass. Must be free of manganese-bronze, aluminumbronze, unsweated radiators or radiator parts, iron, and excessively dirty and corroded materials. Must also be free of any type of munitions including, but not limited to, bullet casings.

Brass 70/30 Tin Plated

Brass Admiralty / Pales

Clean condenser tubing which may be plated or unplated, free of excessive corroded material as mutually agreed. Upon mutual agreement between buyer and seller, may be in the form of whole bundles including iron and/or brass heads as well as iron and/or brass baffles.

Brass Automobile Radiators / Ocean

Mixed automobile radiators, to be free of aluminum radiators, and iron-finned radiators. All radiators to be subject to deduction of actual iron. The tonnage specification should cover the gross weight of the radiators, unless otherwise specified.

Brass Turnings

Scrap borings and turnings alloyed with copper, tin, bismuth, and zinc. Turnings shall be unmixed and have less than 0.2% alloyed lead or as agreed between buyer and seller.

Brass Ingots

Lead Range

Indoor or Outdoor. Contact us for details.

Wheel Weights

To consist of lead tire balances with or without iron clips. Not to include scrap lead, lugs or plates unless specifically agreed to. To be free of foreign material. Review packaging specifications and regulatory status pertaining to shipping with buyer prior to sale.

Remelted Lead Ingots

Refined Lead Ingots

Stainless Steel Scrap Zurik

Shall be made up of a combination of the nonferrous metals: stainless steel, insulated copper wire, aluminum, copper, lead, magnesium, nickel, tin, and zinc, in elemental or alloyed (solid) form. The percentage of each metal within the nonferrous concentrate shall be subject to agreement between buyer and seller.

PET Flake

See PET Bottle description. Flakes can be presented clean (hot or cold washed) or dirty.

Titanium Scrap

Tungsten Scrap

Alloys are defined by a metallic bonding character.[1] The alloy constituents are usually measured by mass percentage for practical applications, and in atomic fraction for basic science studies. Alloys are usually classified as substitutional or interstitial alloys, depending on the atomic arrangement that forms the alloy. They can be further classified as homogeneous (consisting of a single phase), or heterogeneous (consisting of two or more phases) or intermetallic.

Monel

Clear Extruded Acrylic Sheets

Thickness 1/8, 3/16, 1/4 and 3/8 in.

The product descriptions above were sourced from the 2018 Scrap Specification Circular: Guidelines for Nonferrous Scrap, Ferrous Scrap, Glass Cullet, Paper Stock, Plastic Scrap, Electronic Scrap written by the Institute of Scrap Recycling Industries, Inc. (ISRI). Source: http://www.scrap2.org/specs/

Why Us

Benefits

Quality Guarantee

Our business longevity is the result of years of supplying topnotch products. We work only with the best and we stand behind our quality.

Purchasing Products

Our commercial and logistics teams will clarify questions regarding the products we sell, the specifications of our portfolio and our logistical capabilities.

On-Time Delivery

We understand the importance of having just-in-time products to keep businesses fully functional. Our logistics team is designed to offer delivery schedules that will meet your company’s needs.

Supplying Products

Our commercial team will answer all your inquiries related to the products we buy, the process to buy from us, and any other information related to product procurement.

What our customers are saying

Testimonials

Recycling Facility Owner

Colombia

El negocio de trading internacional está basado en confianza. Un atributo que es fundamental para mí y para mi negocio. Royce Corporation es un ejemplo de profesionalismo llevado de una manera muy transparente y honesta. Una compañía que está dispuesta a trabajar en conjunto por un crecimiento mutuo y sostenible. Ha sido un placer tenerlos como cliente por los últimos 17 años.

Aluminum semi-finished product producer

Head of Sales Asia

Working with Royce has been a true pleasure. As a producer, we seek to work with companies that not only add value to our operation but also, that have a long-term commitment. Royce embodies just that; by bringing professionalism and top-quality service along with a great network and reach which enable us to expand our global presence...

Recycling Facility Director

United Kingdom

Hands down the most reliable and creative trading company year in and year out. It has been both a pleasure and a privilege to work alongside Royce Corporation for all these years, we look forward to an even brighter future with a great partner!

Multinational recycling facility Owner

South America

Royce Corporation es la institución líder en nuestro mercado y un claro modelo a seguir. Es un verdadero placer trabajar con un grupo que comprende a plenitud el concepto de “relación a largo plazo” y que a su vez tiene una solidez intachable. En Royce siempre hemos tenido un aliado y sabemos que siempre lo tendremos.

Business Development Manager

United States

Working with Royce has been key for our company’s success and expansion; leveraging on their extensive geographical reach, profound product knowledge, and reliable financial and logistical services we have been able to solidify and expand our product portfolio while increasing our focus on our day to day operations.