Como funciona

Amplia gama de productos

Comercializamos una amplia gama de metales, minerales y productos reciclados como Cobre, Latón, Aluminio, Plomo, Zinc, Acero Inoxidable, Plásticos, Niobio, Tantalio y aleaciones de alto Níquel. Nuestra estructura comercial esta dividiad en cuatro verticales; Reciclados, Primarios, Semi-terminados y Mineria.

Nuestro negocio de Reciclaje comercializa todas las formas de chatarra, desde el post-consumo hasta el post-industrial. Nuestra vertical de Primarios se centra en la comercialización de cátodos, metales primarios y aluminios de alta pureza. El negocio de Semi-terminados comercializa tochos, bobinas, láminas, placas, alambrón, lingotes y aleaciones de fundición primaria. Finalmente, nuestra vertical de Minería está en el mercado de minerales como el tantalio, el niobio, la Scheelita, la Wolframita, entre otros.

Catálogo

Productos

Aluminum
Copper
Brass
Lead
Stainless Steel
Zinc
Plastics
Minerals
High Temperature Alloys
Recycling
Primary
Semi-Finished
Mining
Copper Sudronic Scrap
Contact us for details
Copper #2 / Birch Cliff
A combination of No. 2 copper wire and unalloyed copper scrap having a nominal 96% copper content (minimum 94%) as determined by electrolytic assay. Should be free of the following: Excessively leaded, tinned, soldered copper scrap; brasses and bronzes; excessive oil content, iron and non-metallics; copper tubing with other than copper connections or with sediment; copper wire from burning; insulation; hair wire; brittle burnt wire; and should be reasonably free of ash.
Copper Berry Candy
Clean, untinned, uncoated, unalloyed copper wire and cable, free of brittle burnt wire. Wire gauge subject to agreement between buyer and seller. Also, shall consist of clean, unalloyed, uncoated copper clippings, punchings, bus bars, commutator segments, and clean copper tubing.
Copper Bare Bright Wire / Barley
No. 1 bare, uncoated, unalloyed copper wire, commonly known as Bare Bright copper wire.
Copper #1, Shredded / Clove
No. 1 bare, uncoated, unalloyed copper wire scrap nodules, chopped or shredded, free of tin, lead, zinc, aluminum, iron, other metallic impurities, insulation, and other foreign contamination. Minimum copper 99%. Gauge smaller than No. 16 B & S wire and hydraulically compacted material subject to agreement between buyer and seller.
Copper Shredded / Cobra
No. 2 unalloyed copper wire scrap nodules, chopped or shredded, minimum 97% copper. Maximum metal impurities not to exceed 0.50% aluminum and 1% each of other metals or insulation. Hydraulically compacted material subject to agreement between buyer and seller.
Copper Shredded / Cocoa
Unalloyed copper wire scrap nodules, chopped or shredded, minimum 99% copper. Shall be free of excessive insulation and other non-metallics. Maximum metal impurities as follows: Aluminum .05% Antimony .01% Tin .25% Iron .05% Nickel .05%
Copper Insulated Wire
No. 1 bare, uncoated, unalloyed copper wire (see Barley), not smaller than No. 16 B & S wire gauge (unless smaller wire gauge is mutually agreed upon), with various types of insulation. To be sold on sample or recovery basis, subject to agreement between buyer and seller.
Copper Aluminum Radiators / Talk
Clean aluminum and copper radiators, and/or aluminum fins on copper tubing, free of brass tubing, iron and other foreign contamination.
Copper Ingots
Contact us for details
Copper Coils
Contact us for details
Copper Billets
Contact us for details
Copper Concentrates
Contact us for details
Copper Cathodes
Contact us for details
Aluminum UBC (Used Beverage Cans)
Must be magnetically separated material and free of steel, lead, bottle caps, plastic cans and other plastics, glass, wood, dirt, grease, trash, and other foreign substances. Any free lead is basis for rejection. Any and all aluminum items, other than used beverage cans, are not acceptable.
Aluminum Old Castings / Tense
Shall consist of all clean aluminum castings which may contain auto and airplane castings but no ingots, and to be free of iron, brass, dirt and other non-metallic items. Oil and grease not to total more than 2%.
Aluminum Old Sheet Scrap / Taint Tabor
Shall consist of clean old alloy aluminum sheet of two or more alloys, free of foil, venetian blinds, castings, hair wire, screen wire, food or beverage containers, radiator shells, airplane sheet, bottle caps, plastic, dirt, and other non-metallic items. Oil and grease not to total more than 1%.
Aluminum 6xxx Extrusions
One or more alloys (typically 6063 and 6061). Material may contain “butt ends” from the extrusion process but must be free of any foreign contamination. Anodized material is acceptable. Painted material or alloys other than 6063 must be agreed upon by buyer and seller.
Aluminum EC Wire / Talon
New, clean, unalloyed aluminum wire or cable free from hair wire, ACSR, wire screen, iron, insulation and other non-metallic items.
Aluminum Class 1
Clean, undecorated cans or cups, skeleton, slitter or trim scrap, 3004 or 3104 alloys only. Scrap containing in excess of 1% residual lubricant is unacceptable. Scrap cannot be lacquered, painted, coated or contaminated with gaskets and/or sealant. Other lubricants, such as hydraulic oils) are not acceptable.
Aluminum Class 2
Material consists of clean, compound free can ends (beverage) and tab stock, skeleton and trim scrap, 5182 series alloy only.
Aluminum Class 3
Material consists of spoiled, clean and decorated cans free of residual lubricant and 5182 series lids. Scrap must be 3004 or 3104 alloy only.
Aluminum Radiators / Tally
Clean aluminum radiators and/or condensers. Should be free of all other types of radiators. All contaminants including iron, plastic, and foam not to exceed 1% of weight. Any deviation to this specification, including oxidation and aluminum content, to be negotiated between buyer and seller.
Aluminum Clean Lithographic Sheets / Tablet
To consist of 1000 and/or 3000 series alloys, to be free of paper, plastic, excessively inked sheets, and any other contaminants. Minimum size of 3” (8 cm) in any direction.
Aluminum Wheels / Troma
Clean, single-piece, unplated aluminum wheels of a single specified alloy, free of all inserts, steel, wheel weights, valve stems, tires, grease and oil and other non-metallic items. Variations to this specification should be agreed upon prior to shipment between the buyer and seller.
Aluminum Zorba
Shall be made up of a combination of the nonferrous metals: aluminum, copper, lead, magnesium, stainless steel, nickel, tin, and zinc, in elemental or alloyed (solid) form. The percentage of each metal within the nonferrous concentrate shall be subject to agreement between buyer and seller.
Aluminum Tassel
Old, unalloyed aluminum wire and cable which may contain up to 10% 6000 series wire and cable with not over 1% free oxide or dirt and free from hair wire, wire screen, iron, insulation and other non-metallic items.
Aluminum Twitch
Derived from wet or dry media separation device, the material must be dry and not contain more than 1% maximum free zinc, 1% maximum free magnesium, and 1% maximum of analytical iron. Not to contain more than a total 2% maximum of non-metallics, of which no more than 1% shall be rubber and plastics. To be free of excessively oxidized material, air bag canisters, or any sealed or pressurized items.
Aluminum URD Twang
Insulated aluminum wire, which may or may not contain other wires or metal shielding, with the expected aluminum recovery agreed upon by the buyer and the seller. The material to be free of other wires and cables unless mutually agreed upon.
Aluminum Tarry
Clean aluminum pistons to be free from struts, bushings, shafts, iron rings and nonmetallic items. Oil and grease not to exceed 2%.
Aluminum Twang
Insulated aluminum wire, which may or may not contain other wires or metal shielding, with the expected aluminum recovery agreed upon by the buyer and the seller. The material to be free of other wires and cables unless mutually agreed upon.
Aluminum Primary P1020
P1020 (99.7% min Al) Ingots – 0.10% max Si, 0.20% max Fe
Aluminum Primary P0610
P0610 (99.85% min Al) Ingots – 0.05% max Si, 0.10% max Fe
Aluminum Wire Rod
Contact us for details
Aluminum Foil
Contact us for details
Aluminum RSI Ingot
Contact us for details
Aluminum RSI Sows
Contact us for details
Brass Yellow / Honey
Mixed yellow brass solids, including brass castings, rolled brass, rod brass, tubing and miscellaneous yellow brasses, including plated brass. Must be free of manganese-bronze, aluminumbronze, unsweated radiators or radiator parts, iron, and excessively dirty and corroded materials. Must also be free of any type of munitions including, but not limited to, bullet casings.
Brass Automobile Radiators / Ocean
Mixed automobile radiators, to be free of aluminum radiators, and iron-finned radiators. All radiators to be subject to deduction of actual iron. The tonnage specification should cover the gross weight of the radiators, unless otherwise specified.
Brass Red / Ebony
Red brass scrap, valves, machinery bearings and other machinery parts, including miscellaneous castings made of copper, tin, zinc, and/or lead. Shall be free of semi-red brass castings (78% to 81% copper); railroad car boxes and other similar high-lead alloys; cocks and faucets; closed water meters; gates; pot pieces; ingots and burned brass; aluminum, silicon, and manganese bronzes; iron and non-metallics. No piece to measure more than 12” over any one part or weigh over 100 lbs. Heavier pieces acceptable upon mutual agreement between buyer and seller.
Brass 70/30 Tin Plated
Contact us for details
Brass Turnings
Scrap borings and turnings alloyed with copper, tin, bismuth, and zinc. Turnings shall be unmixed and have less than 0.2% alloyed lead or as agreed between buyer and seller.
Brass Nomad
Yellow brass turnings, free of aluminum, manganese and composition turnings, not to contain over 3% of free iron, oil or other moisture; to be free of grindings and babbitts. To avoid dispute, to be sold subject to sample or analysis.
Brass Admiralty / Pales
Clean condenser tubing which may be plated or unplated, free of excessive corroded material as mutually agreed. Upon mutual agreement between buyer and seller, may be in the form of whole bundles including iron and/or brass heads as well as iron and/or brass baffles.
Brass Night
Strictly of rod turnings, free of aluminum, manganese, composition, Tobin and Muntz metal turnings; not to contain over 3% free iron, oil or other moisture; to be free of grindings and babbitts; to contain not more than 0.30% tin and not more than 0.15% alloyed iron.
Brass Ingots
Contact us for details
Lead Sheet
Contact us for details.
Lead Range
Indoor or Outdoor. Contact us for details.
Soft Lead
Clean soft scrap lead, free of other materials such as drosses, battery plates, lead covered cable, hard lead, collapsible tubes, foil, type metals, aluminum, zinc, iron and brass fittings, dirty chemical lead and radioactive materials.
Wheel Weights
To consist of lead tire balances with or without iron clips. Not to include scrap lead, lugs or plates unless specifically agreed to. To be free of foreign material. Review packaging specifications and regulatory status pertaining to shipping with buyer prior to sale.
Remelted Lead Ingots
Contact us for details.
Refined Lead Ingots
Contact us for details.
Stainless Steel Scrap 304
C (0%-0.07%), Mn (0%-2.0%), Si (0%-0.75%), P (0%-0.045%), S (0%-0.03%), Cr (17.5%-19.5%), Ni (8%-10.5%)
Stainless Steel Scrap 316
C (0%-0.08%), Mn (0%-2.0%), Si (0%-0.75%), P (0%-0.045%), S (0%-0.03%), Cr (16%-18%), Mo (2%-3%), Ni (10%-14%)
Stainless Steel Scrap 430
C (0%-0.12%), Mn (0%-1.0%), Si (0%-1.0%), P (0%-0.04%), S (0%-0.03%), Cr (16%-18%), Ni (0%-0.75%)
Stainless Steel Scrap Zurik
Made up of a combination of the nonferrous metals: stainless steel, insulated copper wire, aluminum, copper, lead, magnesium, nickel, tin, and zinc, in elemental or alloyed (solid) form. The percentage of each metal within the nonferrous concentrate shall be subject to agreement between buyer and seller.
Zinc Die Cast
Miscellaneous old zinc base die castings, with or without iron and other foreign attachments. Must be free of borings, turnings, dross pieces, chunks, melted pieces and skimmings. All unmeltables, dirt, foreign attachments, and volatile substances (such as rubber, cork, plastic, grease, etc.) are deductible
Zinc Dross
Contact us for details.
Zinc Ingots
Contact us for details.
PET Bottle
Any whole Polyethylene Terephthalate (PET, #1) bottle with a screw-neck top that contains the ASTM D7611 “#1, PET or PETE” resin identification code and that is clear, transparent green, or transparent light blue. All bottles should be free of contents or free flowing liquids and rinsed.
PET Flake
See PET Bottle description. Flakes can be presented clean (hot or cold washed) or dirty.
LDPE
Contact us for details.
HDPE
Contact us for details.
Coltan
Contact us for details.
Tin
Contact us for details.
Niobium
Contact us for details.
Titanium Scrap
Contact us for details.
Monel
Contact us for details.
Incoloy
Contact us for detail.
Inconel
Contact us for details.
Hastelloy
Contact us for details.
Aluminum 6xxx Billets x 12″
Diameter range from 7 to 12 inches. Typical series 6063/6061/6060/6005. Contact us for details.
Aluminum 6xxx Billets
Diameter range from 7 to 12 inches. Typical series 6063/6061/6060/6005. Contact us for details.
The product descriptions above were sourced from the 2018 Scrap Specification Circular: Guidelines for Nonferrous Scrap, Ferrous Scrap, Glass Cullet, Paper Stock, Plastic Scrap, Electronic Scrap written by the Institute of Scrap Recycling Industries, Inc. (ISRI). Source: http://www.scrap2.org/specs/
Por que Royce

Beneficios

Garantía de calidad
Nuestra longevidad laboral es el resultado de años de suministro de productos de primer nivel. Trabajamos solo con los mejores y respaldamos nuestra calidad.
Compra de productos
Nuestros equipos comercial y logístico aclarará preguntas sobre los productos que vendemos, las especificaciones de nuestra cartera y nuestras capacidades logísticas.
Entregas a tiempo
Nuestro equipo de logística está diseñado para ofrecer cronogramas de entrega que satisfagan las necesidades de su empresa.
Suministro de productos
Nuestro equipo comercial responderá todas sus consultas relacionadas con los productos que compramos, el proceso de venta y cualquier otra información relacionada con la adquisición de productos.